Every Electrical Service Your Home Needs
EV Charging Services
EV Charger Installation
Professional Level 2 EV charger installation typically costs $400–$1,500 installed and takes 2–4 hours. Charge Home Solutions is a Tesla-certified network of 4,000+ licensed electricians offering free in-home estimates nationwide.
Learn more →Tesla Wall Connector Installation
Tesla Wall Connector installation runs $400–$1,200 installed. As a Tesla-certified installer, Charge Home Solutions wires the 48-amp connector for up to 44 miles of range per hour and registers your warranty.
Learn more →Tesla Universal Wall Connector Installation
The Tesla Universal Wall Connector charges both Tesla and J1772 EVs at up to 48 amps. Installed cost is typically $500–$1,300 with a Tesla-certified electrician.
Learn more →Commercial EV Charging
Commercial EV charging stations for workplaces, multifamily, retail, and fleets. Charge Home Solutions handles site assessment, load management, networking, and rebate paperwork.
Learn more →EV Charger Repair
EV charger not working? Our licensed electricians diagnose and repair home and commercial chargers, faults, tripped breakers, GFCI issues, and connector damage, often same week.
Learn more →EV-Ready Home Wiring
EV-ready wiring installs the 240V circuit and capacity for a future charger, the cheapest time to prepare is during a remodel or panel upgrade.
Learn more →Amazon EV Charger Installation
Bought an EV charger on Amazon? Charge Home Solutions installs it for you, professional, licensed Level 2 installation of any Amazon-purchased charger, typically $400–$1,500 including permit and inspection.
Learn more →Level 2 EV Charger Installation
Level 2 (240V) EV charger installation costs $400–$1,500 installed and adds 25–44 miles of range per hour, 5–10x faster than a wall outlet. Licensed, Tesla-certified electricians, permit included.
Learn more →NEMA 14-50 Outlet Installation
NEMA 14-50 outlet installation costs $300–$900 including a dedicated 50-amp circuit, GFCI breaker where required, permit, and inspection, the flexible way to charge any EV with a plug-in charger.
Learn more →EV Charger Circuit Installation
A dedicated EV charger circuit (240V, 40–60A) costs $300–$1,200 installed depending on distance from the panel. Every EV charger needs one, we run it to code with permit and inspection.
Learn more →Multi-EV Home Charging
Two or more EVs at home? Load-managed (power-sharing) charging lets multiple chargers share one circuit or panel safely, often avoiding a panel upgrade. Installs typically run $800–$2,500.
Learn more →EV Charger Relocation
Moving or remodeling? We relocate your existing EV charger, new circuit run, remount, and inspection, typically $250–$800, or transfer it to your new home.
Learn more →Condo & Apartment EV Charging
EV charging for condos, apartments, and HOAs, from a single assigned-space charger to shared, billed charging for the whole garage. We handle HOA approvals, metering, and load management.
Learn more →Energy Storage & Solar Services
Tesla Powerwall Installation
Tesla Powerwall installation typically costs $11,000–$18,000+ before incentives, depending on the number of units. As a Tesla-certified installer, Charge Home Solutions delivers whole-home backup and claims every state and utility incentive your address qualifies for.
Learn more →Home Battery Installation
Home battery installation provides backup power and energy-cost savings. We install Tesla Powerwall and other leading batteries, sized to your essential loads.
Learn more →Solar Battery Installation
Pairing solar with battery storage lets you use your own clean power day and night and stay powered through outages. State and utility programs, not the expired federal credit, are where the savings are now.
Learn more →Solar Panel Installation
Home solar panel installation typically costs $15,000–$30,000 before incentives, depending on system size. Charge Home Solutions designs and installs rooftop solar, and can pair it with a Tesla Powerwall so you use your own power day and night.
Learn more →Backup Power Systems
Whole-home and partial-home backup using batteries, transfer switches, and generators, designed around the circuits you can't afford to lose.
Learn more →Powerwall 3 Installation
Tesla Powerwall 3 installed by certified electricians, 13.5kWh storage, 11.5kW output, built-in solar inverter. Typically $11,000–$18,000 before state and utility incentives.
Learn more →Multi-Powerwall Systems
Two, three, or more Powerwalls for true whole-home backup, A/C, EV charging, well pumps, everything. Systems typically $20,000–$45,000 before state and utility incentives.
Learn more →Solar + Storage Retrofit
Already have solar? Add a battery and stop exporting cheap and buying expensive. Retrofits typically $10,000–$25,000, and the battery can earn state storage incentives on its own.
Learn more →Off-Grid Power Systems
True off-grid and grid-optional power, solar arrays sized for winter, serious battery banks, and generator backup for the dark weeks. Engineered systems, not kits.
Learn more →Home Energy Monitoring
Circuit-level energy monitoring, see what every appliance costs in real time, catch failing equipment, and right-size solar and battery plans. Installed from $300–$2,000.
Learn more →Electrical Services
Electrical Panel Upgrade
An electrical panel upgrade to 200 amps typically costs $1,500–$4,000. It's often required before adding an EV charger, Powerwall, or major appliances. Charge Home Solutions uses licensed electricians and handles permits and inspection.
Learn more →Whole-House Rewiring
Whole-house rewiring replaces aging or unsafe wiring (knob-and-tube, aluminum, cloth) and typically costs $8,000–$20,000+ depending on home size.
Learn more →Circuit Breaker Replacement
Replacing a faulty or tripping circuit breaker restores safe power flow. Most single-breaker replacements are quick, same-day jobs.
Learn more →Generator Installation
Standby generator installation keeps your home powered automatically during outages. Installed cost typically runs $5,000–$15,000 including the transfer switch.
Learn more →Lighting Installation
Interior and exterior lighting installation, recessed, fixtures, landscape, and smart lighting, by licensed electricians.
Learn more →Electrical Inspection
A professional electrical inspection identifies safety hazards, code violations, and capacity issues, essential before buying a home or adding major loads.
Learn more →240V Outlet Installation
240V outlet installation (NEMA 14-50 / 6-50) powers EV chargers, ranges, dryers, and shop tools. Typical cost is $300–$900 installed.
Learn more →GFCI Outlet Installation
GFCI outlets protect against shock in kitchens, bathrooms, garages, and outdoors, required by code in wet areas.
Learn more →Whole-House Surge Protection
A whole-house surge protector at the panel shields appliances, electronics, EV chargers, and batteries from voltage spikes. Installed cost is typically $300–$700.
Learn more →Transfer Switch Installation
A transfer switch safely connects a generator or battery to your home's circuits during an outage, preventing dangerous backfeed.
Learn more →SPAN Smart Panel Installation
A SPAN smart electrical panel replaces your traditional panel with app-controlled, circuit-level energy management. Installed cost is typically $3,500–$5,500. Charge Home Solutions is a certified SPAN installer.
Learn more →200 Amp Service Upgrade
A 200-amp service upgrade costs $1,500–$4,000 installed and is the modern standard for homes adding EV chargers, batteries, or heat pumps. Includes new panel, permit, utility coordination, and inspection.
Learn more →400 Amp Service Upgrade
A 400-amp service upgrade costs $4,000–$8,000+ and suits large homes and heavy loads, multiple EVs, pool equipment, workshops, large A/C. We engineer, permit, and coordinate the full upgrade.
Learn more →100 Amp Panel Replacement
Replacing an old or failing 100-amp panel costs $1,200–$2,500 like-for-like, or step up to 200 amps for $1,500–$4,000. We'll run the load calculation and tell you honestly which your home needs.
Learn more →150 Amp Service Upgrade
A 150-amp service upgrade costs $1,400–$3,000, a middle step that fits some homes, though most upgrades justify going straight to 200 amps. We quote both so you can compare.
Learn more →Sub Panel Installation
Sub-panel installation costs $1,000–$2,500 and adds breaker space where you need it, garages, workshops, ADUs, additions, without upgrading your main service.
Learn more →Meter Base & Service Entrance Replacement
Damaged, corroded, or outdated meter base? Replacement costs $800–$2,500 including utility coordination, often bundled with a panel or service upgrade.
Learn more →Electrical Panel Relocation
Moving an electrical panel, for a remodel, addition, or code clearance, costs $1,500–$4,000+ depending on distance and circuit count. We handle rerouting, permits, and utility coordination.
Learn more →Federal Pacific Panel Replacement
Federal Pacific (FPE) Stab-Lok panels have a documented history of breakers failing to trip, a serious fire hazard. Replacement costs $1,500–$4,000 and is one of the highest-value safety upgrades a home can get.
Learn more →Zinsco Panel Replacement
Zinsco (and Sylvania-Zinsco) panels are known for breakers that fuse to the bus and fail to trip. Replacement costs $1,500–$4,000. If your panel says Zinsco, book an assessment now.
Learn more →Challenger & Pushmatic Panel Replacement
Challenger panels (recalled breakers) and obsolete Pushmatic panels both warrant replacement, parts are scarce, failures are documented, and insurers flag them. Replacement runs $1,500–$4,000.
Learn more →Fuse Box to Breaker Panel Conversion
Still on a fuse box? Converting to a modern breaker panel costs $1,500–$4,000, ends the blown-fuse routine, and unlocks insurance savings, EV charging, and modern appliance loads.
Learn more →Aluminum Wiring Remediation
Homes wired 1965–1973 often have aluminum branch wiring, a documented fire risk at connections. CPSC-recognized remediation (COPALUM or AlumiConn) costs $1,500–$8,000, far less than a full rewire.
Learn more →Knob & Tube Wiring Replacement
Knob-and-tube wiring, common in homes built before 1950, is ungrounded, brittle with age, and unsafe under insulation. Replacement costs $5,000–$15,000+ depending on home size and access.
Learn more →New Construction Wiring
Complete electrical for new builds, service, panel, rough-in, devices, and trim, engineered EV-ready and electrification-ready from day one. We work to your plans and schedule with builders and GCs.
Learn more →Addition & Remodel Wiring
Electrical for additions, kitchen and bath remodels, and basement finishes, new circuits, panel/sub-panel capacity, code updates, and coordination with your GC from rough-in to final.
Learn more →Dedicated Circuit Installation
Dedicated circuits for appliances that need their own breaker, ranges, dryers, HVAC, microwaves, freezers, sump pumps, home offices. Typically $250–$800 per circuit installed with permit.
Learn more →Outlet Installation & Replacement
New outlets installed and old ones replaced, standard, GFCI, USB-C, smart, and 20-amp, typically $150–$400 per location including materials. No more extension-cord living.
Learn more →Outlet Not Working, Repair
Dead outlet? Warm cover plate? Plugs falling out? We diagnose and repair failed outlets fast, often a tripped GFCI, a failed device, or a loose backstab connection behind the wall.
Learn more →AFCI Protection Installation
AFCI breakers detect dangerous arcing and cut power before a fire starts. Current code requires them in most living areas; retrofitting a panel costs $400–$1,500 depending on circuit count.
Learn more →Smart Switch & Dimmer Installation
Smart switches, dimmers, and 3-way controls installed correctly, neutral wiring sorted, LED flicker eliminated, scenes and apps configured. Typically $150–$350 per switch installed.
Learn more →Outdoor & Weatherproof Outlet Installation
Outdoor outlets installed to code, GFCI-protected, weather-resistant devices with in-use covers, for patios, holiday lighting, EV trickle charging, and yard equipment. Typically $200–$600.
Learn more →Electrical Troubleshooting & Repair
Flickering lights, tripping breakers, dead circuits, mystery switches, we find electrical faults fast with systematic diagnostics and fix them right. Diagnostic visits typically $150–$450.
Learn more →Recessed Lighting Installation
Recessed (can) lighting installed cleanly in finished ceilings, typically $150–$300 per light including modern LED wafers, dimmers, and patching-friendly technique. Whole-room projects run $800–$3,000.
Learn more →Under-Cabinet Lighting Installation
Hardwired under-cabinet lighting, LED strips or puck lights with hidden wiring and dimming, typically $300–$1,200 installed. The single best upgrade for kitchen task lighting.
Learn more →Ceiling Fan Installation
Ceiling fans installed safely, fan-rated box, proper support, balanced blades, typically $150–$600 including new wiring or switch work. High ceilings and smart fans welcome.
Learn more →Bathroom Exhaust Fan Installation
Bath exhaust fans installed and replaced, proper CFM sizing, ducted outside (never into the attic), quiet modern units with humidity sensing. Typically $250–$800 installed.
Learn more →LED Lighting Retrofit
Whole-home LED retrofits, fixtures, recessed conversions, and dimmer matching, cut lighting energy 75–85% and end bulb-changing forever. Typical projects run $500–$3,000.
Learn more →Landscape Lighting Installation
Low-voltage landscape lighting, paths, trees, facades, steps, professionally designed and installed with quality brass fixtures and smart control. Typical systems run $1,500–$5,000.
Learn more →Security & Flood Lighting
Motion-activated security lighting, LED floods, and camera-integrated fixtures installed where they actually deter, corners, approaches, and dark zones. Typically $200–$800 per location.
Learn more →Smart Lighting Systems
Whole-home smart lighting, Lutron, Matter/Thread, and scene-based control, designed and installed so every switch still works and every room has moods. Systems typically $500–$3,000+.
Learn more →Chandelier Installation
Chandeliers hung safely, weight-rated boxes, two-story foyers, dimming, and precise height, typically $200–$800, with heavy or high installations quoted individually.
Learn more →Smoke Detector Installation
Hardwired, interconnected smoke detectors installed to code, every bedroom, hallway, and level, typically $100–$250 per detector or $400–$1,200 whole-home, including 10-year sealed or smart units.
Learn more →Carbon Monoxide Detector Installation
CO detectors installed where code and physics agree they belong, outside sleeping areas, on every level, near attached garages. Hardwired, interconnected, or combined smoke/CO units, typically $100–$300 each.
Learn more →Electrical Code Correction
Failed inspection? Insurance or appraisal flagged violations? We correct electrical code issues, from double-tapped breakers to missing GFCI, with documented, permitted repairs. Typically $200–$2,000 depending on the list.
Learn more →Home Buyer Electrical Inspection
Buying or selling? A licensed-electrician inspection goes deeper than a general home inspector, panel internals, wiring type, code status, and a repair-cost reality check. Typically $200–$450.
Learn more →Portable Generator Hookup
Power your home safely from a portable generator: inlet box + interlock or manual transfer switch, installed and permitted for $500–$1,500. No more extension cords through windows, and no deadly backfeeding.
Learn more →Generator Repair & Maintenance
Standby generator not starting, failing its exercise cycle, or overdue for service? We repair and maintain home generators, transfer switch faults, battery, fuel, and control issues, typically $150–$800.
Learn more →Smart Home Wiring & Automation
Smart home infrastructure done by licensed electricians, switches, sensors, hubs, and the wiring that makes automation reliable instead of flaky. Projects typically $500–$5,000 by scope.
Learn more →Smart Thermostat Installation
Nest, ecobee, and Honeywell smart thermostats installed right, C-wire sorted, HVAC compatibility verified, schedules configured. Typically $150–$400 installed, often less with utility rebates.
Learn more →Video Doorbell & Smart Lock Installation
Ring, Nest, and other video doorbells installed with proper power, transformer upgrades, chime compatibility, angle mounts, plus smart lock setup. Typically $150–$450.
Learn more →Ethernet & Network Wiring
Hardwired Cat6 network drops, whole-home Wi-Fi with wired access points, and a clean structured-wiring panel, typically $150–$350 per drop, whole-home projects $800–$3,000.
Learn more →Home Theater & AV Wiring
In-wall AV wiring for theaters and media rooms, concealed TV cabling, surround speaker pre-wire, projector runs, and dedicated AV circuits. Typically $500–$2,500 by scope.
Learn more →Security Camera Wiring
Wired PoE security cameras, one cable per camera for power and data, no batteries to charge, no Wi-Fi dropouts, installed and aimed properly. Typically $150–$400 per camera location.
Learn more →Hot Tub & Spa Wiring
Hot tub electrical done to code: dedicated 50–60A circuit, GFCI spa panel disconnect within sight, buried conduit, and bonding. Typically $800–$2,000 installed with permit and inspection.
Learn more →Pool Equipment Wiring
Pool pumps, heaters, lights, and automation wired to code, including the equipotential bonding grid that makes pools safe. Typical projects $1,000–$3,500 with permit and inspection.
Learn more →Sauna Wiring
Home sauna electrical, dedicated 240V circuits for heaters (30–60A), high-temp rated wiring inside the hot room, controls, and lighting. Typically $600–$1,500 installed.
Learn more →Outdoor Kitchen Electrical
Outdoor kitchen wiring, GFCI circuits for appliances, in-counter outlets, lighting, and gas-appliance ignition power, weatherproof and to code. Typically $800–$2,500.
Learn more →Detached Garage & Shed Power
Power to detached structures, trenched underground feed, sub-panel, lights, outlets, EV charger or welder circuits. Typical projects $1,500–$5,000 depending on distance and loads.
Learn more →Well Pump Wiring
Well pump circuits, pressure switch wiring, and control boxes, installed, repaired, and backed up for outages. Typically $500–$1,500; no water is an emergency we treat like one.
Learn more →Mini-Split & HVAC Circuit Installation
Electrical for mini-splits and HVAC, dedicated 240V circuits, outdoor disconnects, whip connections, and condensate-safe routing. Typically $400–$1,200 per system.
Learn more →24/7 Emergency Electrical Services
24/7 Emergency Electrician
Electrical emergency? Licensed emergency electricians available 24/7 nationwide, sparking outlets, burning smells, dead panels, storm damage. Call 888-995-6044 now for fast dispatch.
Learn more →Power Outage Repair
Power out but your neighbors have power? The problem is likely your panel, main breaker, or service entrance, our electricians diagnose and repair home-side outages fast, 24/7.
Learn more →Sparking Outlet & Panel Repair
Sparking outlet, switch, or panel? Stop using the circuit and call now, sparking indicates arcing, the leading cause of electrical fires. We repair it 24/7.
Learn more →Electrical Burning Smell, Urgent Inspection
A fishy, acrid, or burning-plastic smell with no obvious source is the classic sign of overheating wiring or a failing panel, an urgent fire risk. We inspect and repair 24/7.
Learn more →Storm Damage Electrical Repair
Storm damage to your electrical system, downed service lines, ripped-off masts, water in the panel, surge damage, repaired fast by licensed electricians, with insurance-ready documentation.
Learn more →Commercial Electrical Services
Commercial Electrician
Licensed commercial electricians for offices, retail, multifamily, and light industrial, installs, upgrades, maintenance, and code compliance.
Learn more →EV Fleet Charging
EV fleet charging depots with load management, networking, and rebate capture, engineered to charge every vehicle overnight and scale as your fleet grows.
Learn more →Tesla Wall Connector for Business
Commercial Tesla Wall Connector installation by Charge Home Solutions: certified electricians, smart power sharing, networking, and rebate capture, engineered to charge every vehicle and scale as your business grows.
Learn more →Hotel & Hospitality EV Charging
EV charging turns a hotel into a destination for the fastest-growing segment of travelers, and it earns its keep: guests book longer, spend on-site, and return. Charge Home Solutions designs and installs Level 2 and DC fast charging for hotels, resorts, and restaurants, and captures the utility incentives that shrink the upfront cost.
Learn more →Retail & Shopping Center EV Charging
For retail and shopping centers, EV charging is a dwell-time engine: drivers seek out stores where they can charge, stay longer, and spend more while they do. Charge Home Solutions installs networked Level 2 and DC fast charging for retail sites, with load management and per-session billing, and captures the utility rebates that cut the upfront cost.
Learn more →Commercial Lighting Retrofit
LED retrofits for offices, retail, and warehouses cut lighting energy 50–70% with paybacks often under 3 years, plus utility rebates that shrink the upfront cost. Minimal disruption, maximum ROI.
Learn more →Commercial Panel & Service Upgrade
Commercial service upgrades, 200A to 2,000A, three-phase, tenant metering, and code compliance, engineered and built with minimal downtime for your operations.
Learn more →Commercial Generator Installation
Standby generators for businesses, sized to keep revenue, refrigeration, and life-safety systems running through any outage. Design, permits, fuel, transfer switching, and service contracts.
Learn more →Tenant Improvement Electrical
Tenant improvement electrical for offices, retail, and medical suites, demo, new circuits, lighting, and panel work delivered on your GC's schedule, permitted and inspected without slipping the opening date.
Learn more →Restaurant & Commercial Kitchen Electrical
Restaurant electrical from buildout to emergency service, kitchen equipment circuits, hood interlocks, dining lighting, and the panel capacity a modern line demands. We keep kitchens cooking.
Learn more →Industrial Electrical Services
Industrial electrical for light manufacturing, warehouses, and processing, three-phase power, motor circuits, machine hookups, and preventive maintenance that protects uptime.
Learn more →Data Center & Server Room Electrical
Server room and edge data center electrical, dedicated circuits, UPS integration, redundant feeds, and the grounding and cooling power that uptime SLAs quietly depend on.
Learn more →Facility Electrical Maintenance Contracts
Scheduled electrical maintenance for commercial facilities, thermal scans, panel service, lighting rounds, and code compliance on a contract that converts emergencies into calendar items.
Learn more →Property Management Electrical
One electrical partner for your whole portfolio, unit turns, tenant calls, common areas, inspections, and EV charging, with priority dispatch and consolidated billing nationwide.
Learn more →