Dedicated Circuit Installation
Quick answer
Dedicated circuits for appliances that need their own breaker, ranges, dryers, HVAC, microwaves, freezers, sump pumps, home offices. Typically $250–$800 per circuit installed with permit.Typical installed cost: $250–$800
A dedicated circuit serves one load only, no sharing, no nuisance trips, full rated power. Code requires them for most fixed appliances, and they're the fix when the microwave keeps killing the kitchen outlets or the space heater dims the room.
About Dedicated Circuit Installation
Sharing is for cookies, not for circuits feeding motors and heating elements. A dedicated circuit gives one appliance its own breaker, conductor run, and full rated capacity, which is why code mandates them for fixed appliances and why they end the breaker-trip whack-a-mole in busy kitchens.
Each install is a clean job: correctly sized breaker and wire for the load, a run from panel to appliance location, and permit and inspection where required. Most homes need two or three more than they have.
The usual suspects for new dedicated circuits
- Microwave that kills the kitchen counter outlets
- Space heater or window A/C dimming the room
- Freezer or second fridge in the garage
- Sump pump (never share a life-safety pump's circuit)
- Home office with UPS, monitors, and a space heater
- Hot tub, sauna, or workshop equipment
The circuit-sharing symptoms homeowners normalize
People adapt to electrical inconvenience with folklore: 'you can't run the microwave and toaster together,' 'the office breaker trips if the heater's on,' 'unplug the freezer before vacuuming the garage.' Each of these is a shared circuit at its limit, normalized instead of fixed.
The fix is mundane and permanent: a dedicated circuit for the heavy appliance, typically $250–$800 installed. Beyond convenience, there's a wear story, circuits running near capacity heat their connections cycle after cycle, which is how backstabbed outlets and worn breakers fail years early. If your household has plug-in choreography, that's the diagnostic; the free assessment prices the cure.
How it works
Free assessment
A licensed electrician evaluates your panel, capacity, and site at no cost.
Transparent quote
You get a clear, written, fixed price, no surprises, no pressure.
Professional install
Tesla-certified electricians complete the work to code, permit pulled.
Inspection & warranty
We schedule inspection and back the work with our workmanship guarantee.
What's included
- Licensed, insured & Tesla-certified electrician
- Free in-home assessment and load calculation
- Permit pulled and inspection scheduled
- All materials and code-compliant wiring
- Clean, professional install with cleanup
- Workmanship guarantee of up to 10 years
Get a free dedicated circuit installation estimate
Book your free in-home estimate
Pick a time that works for you and we will match you with a licensed, Tesla-certified electrician in your area. No obligation, transparent fixed pricing.
Book Your Free In-Home Consultation →Frequently asked questions
Ranges, ovens, dryers, water heaters, HVAC equipment, dishwashers, garbage disposals, microwaves, refrigerators (recommended), sump pumps, and EV chargers, plus anything that trips shared circuits regularly.
Those loads share one circuit that can't carry both. A dedicated circuit for the heavy appliance is the permanent fix, resetting the breaker is not.
If it heats, cools, or pumps, or if its nameplate exceeds ~50% of a circuit's capacity, it wants dedication. Repeated trips when it runs alongside anything else is the practical proof.
More electrical services
Electrical Panel Upgrade
An electrical panel upgrade to 200 amps typically costs $1,500–$4,000. It's often required before adding an EV charger, Powerwall, or major appliances. Charge Home Solutions uses licensed electricians and handles permits and inspection.
Learn more →Whole-House Rewiring
Whole-house rewiring replaces aging or unsafe wiring (knob-and-tube, aluminum, cloth) and typically costs $8,000–$20,000+ depending on home size.
Learn more →Circuit Breaker Replacement
Replacing a faulty or tripping circuit breaker restores safe power flow. Most single-breaker replacements are quick, same-day jobs.
Learn more →Generator Installation
Standby generator installation keeps your home powered automatically during outages. Installed cost typically runs $5,000–$15,000 including the transfer switch.
Learn more →