Carbon Monoxide Detector Installation
Quick answer
CO detectors installed where code and physics agree they belong, outside sleeping areas, on every level, near attached garages. Hardwired, interconnected, or combined smoke/CO units, typically $100–$300 each.Typical installed cost: $100–$300
Carbon monoxide is invisible, odorless, and kills sleeping families, which is why placement rules differ from smoke detectors and why guessing is dangerous. Any home with gas appliances, a fireplace, or an attached garage needs CO coverage; we install it interconnected and code-correct.
About Carbon Monoxide Detector Installation
CO poisoning's cruelty is its subtlety: flu-like symptoms, drowsiness, and confusion that sets in before anyone suspects the furnace. Roughly 400 Americans die from accidental CO poisoning yearly, mostly at home, mostly at night, and disproportionately during outages when generators and alternative heat come out.
Coverage rules follow the sources: fuel-burning appliances, fireplaces, and attached garages (idling cars are a classic cause). We place detectors where sleeping people will hear them, interconnect them with the smoke system where appropriate, and use 10-year sealed units that can't be silenced by a missing battery.
Homes that need CO coverage
- Gas furnace, water heater, range, or dryer
- Any fireplace, gas or wood
- Attached garage, even with an electric car (guests idle)
- Portable generator owners: your outage plan includes CO risk
- Fuel-burning space heaters or backup heat
How it works
Free assessment
A licensed electrician evaluates your panel, capacity, and site at no cost.
Transparent quote
You get a clear, written, fixed price, no surprises, no pressure.
Professional install
Tesla-certified electricians complete the work to code, permit pulled.
Inspection & warranty
We schedule inspection and back the work with our workmanship guarantee.
What's included
- Licensed, insured & Tesla-certified electrician
- Free in-home assessment and load calculation
- Permit pulled and inspection scheduled
- All materials and code-compliant wiring
- Clean, professional install with cleanup
- Workmanship guarantee of one year
Carbon Monoxide Detector Installation near you
Carbon Monoxide Detector Installation is available nationwide. Charge Home Solutions runs a network of 4,000+ licensed, Tesla-certified electricians serving thousands of cities and towns across all 50 states, so you get a local pro who knows your area's permit and inspection rules, not an out-of-town subcontractor. Enter your address for a free in-home estimate and we will match you with a certified electrician near you.
Find a certified electrician in your state
Get a free carbon monoxide detector installation estimate
Book your free in-home estimate
Pick a time that works for you and we will match you with a licensed, Tesla-certified electrician in your area. No obligation, transparent fixed pricing.
Book Your Free In-Home Estimate →Frequently asked questions
Outside every sleeping area, on every level including the basement, and near (not inside) an attached garage. Unlike smoke, CO mixes with air, so wall or ceiling placement both work, but proximity to bedrooms is critical.
If there's an attached garage, a fireplace, or a fuel-burning backup heater, yes. Fully electric with none of those, code may not require it, but a portable generator used in an outage is exactly when CO deaths happen.
Combined units simplify hardwired interconnection and cover both hazards at code locations. We use them at overlap points and dedicated CO units where only CO rules apply.
Single chirps usually mean low battery or end-of-life; four beeps repeating means CO detected, get out and call 911. Check the pattern printed on the unit, and replace any detector older than its rated life (5–10 years).
More electrical services
Electrician Services
Charge Home Solutions is a nationwide network of 4,000+ licensed, Tesla-certified electricians handling the full range of home electrical work: EV charger installation, Tesla Powerwall and home battery, electrical panel upgrades, generator installation, rewiring, outlets and circuits, lighting, and inspections. Every job includes a free in-home estimate, a fixed written price, permits and inspection, and an one-year workmanship guarantee.
Learn more →Electrical Panel Upgrade
An electrical panel upgrade to 200 amps typically costs $1,500–$4,000. It's often required before adding an EV charger, Powerwall, or major appliances. Charge Home Solutions uses licensed electricians and handles permits and inspection.
Learn more →Whole-House Rewiring
Whole-house rewiring replaces aging or unsafe wiring (knob-and-tube, aluminum, cloth) and typically costs $8,000–$20,000+ depending on home size.
Learn more →Circuit Breaker Replacement
Replacing a faulty or tripping circuit breaker restores safe power flow. Most single-breaker replacements are quick, same-day jobs.
Learn more →