Tesla Certified Installer & Electrician in Winston-Salem, NC
Local details for Winston-Salem
- City
- Winston-Salem, NC
- County
- Forsyth County
- Primary utility
- Duke Energy
- Climate
- Hurricanes inland, ice storms
- Permit handled by
- Forsyth County / city building dept.
- Rebates checked
- Duke Charger Prep Credit
What it costs to charge an EV in Winston-Salem
Home charging is far cheaper than gasoline. At NC's average residential electricity rate, here is what a typical EV costs to charge in Winston-Salem. Your exact rate depends on Duke Energy and your plan, and we set charging to the cheapest hours during installation.
| Driving in Winston-Salem | Home charging (EV) | Gasoline car |
|---|---|---|
| Cost per 1,000 miles | $39 | $118 |
| Overnight charge (about 200 miles) | $8 | $24 |
| Typical cost per mile | 3.9¢ | 11.8¢ |
Source: U.S. Energy Information Administration average residential electricity price for NC (14.0¢/kWh), a typical EV efficiency of 0.28 kWh per mile, and a 28 mpg gas car at about $3.30 per gallon. Shown for comparison; your actual utility rate and time-of-use plan determine final cost.
Serving Winston-Salem, NC
Charge Home Solutions serves Winston-Salem and Forsyth County with Tesla-certified EV charger installation, Powerwall, and licensed electrical work. Duke Energy delivers power here, and the city's mix of historic homes and growing suburbs keeps demand steady for panel upgrades alongside EV charging.
We pull the City of Winston-Salem or county permit and run a load calculation before quoting, older West End and Ardmore homes often need a 200-amp upgrade before a Level 2 charger, while newer Clemmons and Kernersville builds usually have room. We handle the permit and inspection end to end.
Areas we serve
Popular services in Winston-Salem
EV Charger Installation in Winston-Salem, NC
EV Charger Installation in Winston-Salem by licensed, Tesla-certified electricians, typically $400–$1,500 installed, including Forsyth County permit and inspection.
Pricing & details →Tesla Powerwall Installation in Winston-Salem, NC
Tesla Powerwall Installation in Winston-Salem by licensed, Tesla-certified electricians, typically $11,000–$18,000 installed, including Forsyth County permit and inspection.
Pricing & details →Electrical Panel Upgrade in Winston-Salem, NC
Electrical Panel Upgrade in Winston-Salem by licensed, Tesla-certified electricians, typically $1,500–$4,000 installed, including Forsyth County permit and inspection.
Pricing & details →Generator Installation in Winston-Salem, NC
Generator Installation in Winston-Salem by licensed, Tesla-certified electricians, typically $5,000–$15,000 installed, including Forsyth County permit and inspection.
Pricing & details →Services in this area
EV Charging Services
Tesla-certified EV charger installation, repair, and EV-ready wiring for homes and businesses.
Learn more →Energy Storage & Solar Services
Tesla Powerwall, home batteries, solar-plus-storage, and whole-home backup power.
Learn more →Electrical Services
Licensed residential electrical work: panel upgrades, rewiring, generators, outlets, and inspections.
Learn more →24/7 Emergency Electrical Services
Licensed emergency electricians available 24/7 for outages, sparking outlets, burning smells, and storm damage, fast response nationwide.
Learn more →Commercial Electrical Services
Commercial electrician services, EV charging, and fleet electrification for businesses.
Learn more →Why Winston-Salem homeowners choose us
- Local, licensed electricians serving Winston-Salem and the surrounding area
- Tesla Energy Certified for Wall Connector & Powerwall
- Free in-home estimates with transparent, fixed pricing
- Permits and inspections handled for you
- One-year workmanship guarantee
- Financing available on qualifying installs
Winston-Salem, frequently asked questions
We do. Our licensed electricians pull the City of Winston-Salem or Forsyth County electrical permit, coordinate any Duke Energy service change, and schedule inspection.
Older West End and Ardmore homes often need a 200-amp upgrade for a 48-amp charger; newer Clemmons builds usually have room. We run a load calculation first.